Products at SB Services > Pneumodip

Dip Tube The Dip Tube is pressurised so that a back pressure is sensed when the end of the tube is covered with liquid and with enough pressure to allow "bubbles" out the end. As the level falls and the tube is uncovered the control system senses the fall in pressure and gives a signal which can start or stop pumps, open or close valves or operated audio or visual warnings.Lengths are manufactured to suit your application and are available with ATEX approval.

Not suitable for pressurised tanks or air bubble sensative material.

Specification


Tubes Stainless Steel
Inlet P max = 6 bar
Temperature 0 to +50 C

.